SaniPlus

Description

Saniplus: for a new bathroom in a loft conversion or extension. Takes waste from a bath, shower cubicle, toilet and wash basin

Saniplus, the top of the range product enabling the addition of a complete bathroom - WC, shower installation, bidet and washbasin - has also been re-cased with sound reduction, and an integrated carbon filter.

A powerful motor enables Saniplus to pump the waste and water from a complete bathroom up to 5m vertically, 100m horizontally or a lesser combination of both.

Add a complete bathroom in a basement conversion or loft extension or anywhere conventional large bore pipework is impractical.

Key Features / Applications

Saniplus takes waste from:
A single WC
Washbasin
Bath
Shower
Power shower
Hydromassage
Bidet
Can be fitted with Sanialarm

Specification

Motor induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles.
Watts (Consumption) 400w
Electrical Supply 220-240V 50Hz
Flow rate at max head l/min 40
Horizontal Discharge 100 metres
Vertical Discharge 5 metres
Gravity fall on horizontal installations 1:100
Discharge Pipe Diameter 22mm
Materials Polypropylene, C.R.P., stainless steel, Neoprene
Type of WC Pan (not included) Short spigot 100mm HO outlet (BS EN 33/37)
Motor RPM 2800 RPM
Normal Running Time WC 10–20 secs approx or as required, to discharge bath, shower etc
Dimensions (vertical height is measured from floor level) 512W x 305 O/H x 200D (requires 210mm behind spigot)
Technote Designed to fit BS EN 33/37 WC pans. As close coupled cistern dimensions vary, it may be necessary, with certain designs, to utilise a spacer between cistern and wall